Shopping Cart
Your shopping cart is empty
Safecoat Penetrating WaterStop is a zero voc, non-film forming sealer designed to improve water resistance and repellency in a wide variety of surfaces, including brick walls, concrete foundations, stucco, stone and most unglazed tile.
It is not toxic and low odor, making it non-offensive to installer and occupant.
It can be used indoors instead of a typical high solvent content sealer and is durable enough for use outdoors.
USE ON: Porous, mineral containing surfaces such as brick, pavers, concrete block and other cementitious materials, stone and stucco. Not suitable for wood.
ADVANTAGES / SIGNIFICANT BENEFITS:
- Good water resistance for up to five years when properly applied.
- Low odor, non-offensive to installer and occupant.
- Safely used by and for the chemically sensitive.
- Fights indoor air pollution
- Zero VOC content, meets or exceeds all federal and state air quality regulations, including California.
- Contains no formaldehyde.
SURFACE PREPARATION: All surfaces must be clean, dry, free from dirt, dust, efflorescence, grease, wax, oil, silicone, tsp/soap, mill scale, oxidation, loose peeling paint
or varnish, or any foreign matter/contaminants. Remove all mildew before coating any surface.
View Penetrating Water Stop data sheet.
View Penetrating Water Stop MSDS.
COVERAGE: Most surfaces, 200-300 square feet per gallon. Natural limestone, 300-500 square feet per gallon.
CLEAN-UP: Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water.
DRYING/CURING TIME: 24 hours full cure in moderate humidity and heat.






Updating...




