Safecoat DuroStain is a premium quality, fast curing low sheen finish semi-transparent stain for interior and exterior surfaces.
Exterior applications may require the addition of a mildewcide.
It promotes sealing of porous surfaces and has good adhesion for superior protection as a decorative colorant. It contains no aniline dyestuffs, no gilsonite or asphalt, no aromatic solvents, formaldehyde or UV inhibitors.
USE ON: Safecoat DuroStain is recommended for unsealed wooden surfaces. Note: staining large surfaces such as floors with a water-based stain requires significant expertise, and is not recommended for the average user.
COLORS: Clear (not shown), Cedar, Walnut, Birch, Maple, Redwood, Mahogany, Oak. Stains may be mixed together to modify color.
NOTE: Safecoat Durostain uses natural mineral pigments and slight variation in color may accordingly occur between batches. Always use material from the same batch for a specific job.
ADVANTAGES / SIGNIFICANT BENEFITS:
- Excellent lightfast pigmentation stability.
- Superior, durable stain.
- Safely used by and for the chemically sensitive.
- Low odor, non-offensive to installer and occupant.
- Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
COLORS: Clear (not shown), Cedar, Walnut, Birch, Maple, Redwood, Mahogany, Oak. Stains may be mixed together to modify color.
NOTE: Safecoat Durostain uses natural mineral pigments and slight variation in color may accordingly occur between batches. Always use material from the same batch for a specific job.
SCS CERTIFIED – LEED QUALIFIED
View DuroStain Colors brochure.
View Durostain Clear base MSDS.
COVERAGE: One gallon of Safecoat DuroStain covers approximately 300 square feet in one coat depending on surface porosity and the intensity of the stain color desired.
CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice® Super Clean or SafeChoice® Safety Clean and warm water. To recycle or properly dispose of paint in your community call 1-800-CLEANUP (U.S.A. only) or visit www.Earth911.org.
DRYING/CURING TIME: Under normal conditions, Safecoat DuroStain dries to touch in one hour and is re-coatable after two hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
| DuroStain - Birch |
|
$ 19.85 | ||
|
|
||||
| DuroStain - Cedar |
|
$ 19.85 | ||
|
|
||||
| DuroStain - Clear |
|
$ 16.85 | ||
|
|
||||
| DuroStain - Mahogany |
|
$ 29.85 | ||
|
|
||||
| DuroStain - Maple |
|
$ 19.85 | ||
|
|
||||
| DuroStain - Oak |
|
$ 19.85 | ||
|
|
||||
| DuroStain - Redwood |
|
$ 22.85 | ||
|
|
||||
| DuroStain - Walnut |
|
$ 19.85 | ||
|
|
||||
Updating...
