Shopping Cart
Your shopping cart is empty
Safecoat Caulking Compound is a not-toxic, water-based, elastic emulsion type caulking compound designed to replace oil caulk and putty for windows, cracks and general maintenance work.
It will not dry out or crack and does not release any solvents or obnoxious odors. Safecoat Caulking Compound provides a water resistant, flexible, easy to install, non sag sealant with excellent initial and permanent adhesion. As a ready-to-use, pigmented elastomer, Safecoat Caulking Compound has thixotropic properties which enable the application to be made with ease with no stringiness and yet maintains flexibility and toughness with rapid drying characteristics.
It may be applied to a variety of substrates and has high durability. Resin rich formula affords maximum bond strength.
USE ON: Use for caulking windows, sealing cracks, filling holes, door perimeters, walls and woodwork, siding openings and masonry cracks.
ADVANTAGES / SIGNIFICANT BENEFITS:
- Effective, easy to use.
- Safely used by and for the chemically sensitive.
- Low odor, non-offensive to installer and occupant.
- Very low VOC content.
- Contains no formaldehyde.
PERFORMANCE VALUES: Not-toxic, no aromatic solvents, single component, good initial tack, water resistant, high adhesion, excellent aging stability, wide use of area, bonds to most substrates, more than 10% elongation, low shrinkage, may be painted, clean with water.
SURFACE PREPARATION: Prime and seal surfaces completely before application of caulk to protect against undue absorption into substrate. All surfaces to receive caulk and overlays must be sound, intact and cleaned of any grease, oils, dust, dirt, wax, unsound prior caulk and other foreign materials. Washing with a low odor, not toxic cleaner like SafeChoice Super Clean is recommended. Surface must be completely dry and stable prior to application.
View Caulking Compound data sheet.
COVERAGE: 1/4” x 1/4” (6.4mm x 6.4mm) width depth cross section can be filled at a rate of approximately 30 lineal feet per tube.
CLEAN-UP: Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water.
DRYING/CURING TIME: Under normal conditions, 24 hours for full cure. Normal conditions include a clean, dry surface, access to fresh air flow, a dust free environment, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat Multi-Purpose Caulk to cure more slowly.
Updating...
