Safecoat DynoSeal is a sophisticated, low odor, all weather, waterproof, vapor-proof coating and sealer that remains flexible for years. It is highly resistant to flame spread and temperature change, and when cured is also highly resistant to gasoline, oil, grease, fungi, acids and alkalines. It has very low odor upon application and is odor free once cured. For interior or exterior use.
USE ON: Safecoat DynoSeal is recommended for use on seamless roofs and as a deck coating and underlayment for shower stalls, pools, tubs and saunas. It is also recommended for use in repairing roofs, flashing, shingles and metal seams, and as a vapor barrier against moisture from below-grade foundations. It is an excellent sound deadener. Safecoat DynoSeal adheres well to concrete, block, metal, wood and hot mop asphalt and dries black.
ADVANTAGES / SIGNIFICANT BENEFITS:
- Versatile, waterproof, vapor proof sealer. Lasts for years if properly installed.
- Low odor, non-offensive to installer and occupant.
- Safely used by and for the chemically sensitive.
- Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
- Contains no formaldehyde.
COVERAGE: 100 square feet per gallon at 15 mils thickness (7½ mils cured).
CLEAN-UP: Properly dispose of used applicators.
DRYING/CURING TIME: Dries to touch within one hour under moderate humidity at 68 degrees F. Temperatures
should be expected to remain above 45 degrees F for two days to allow full curing. Surface remains tacky to touch
after drying.
Product color: black
Updating...
