Safecoat DynoFlex RoofGuard is a unique, water based, low odor elastomeric coating which can be used on composition roofs, rock roofs, cured hot melt asphalt, new polyurethane foam, properly primed wood, metal, masonry, tilt up concrete and mobile homes. It reflects ultraviolet light and will lower the inside temperature from 10-20 degrees F. DynoFlex RoofGuard has excellent flexibility (up to 300%), excellent water resistance and bridges small cracks very well.
OTHER USES: DynoFlex RoofGuard makes an excellent elastomeric exterior wall coating. (Be sure to provide adequate ventilation so moisture will not be trapped inside the wall.)
COLORS: Standard color is white. DynoFlex Roof Guard may be obtained in other colors on special order, but white provides superior UV resistance. For maintenance or color coating, we recommend a topcoat of Safecoat CemBond paint, which will provide even further weather and water resistance.
THINNING: None required. If necessary, use water sparingly.
CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water. If DynoSeal RoofGuard is allowed to harden on tools, it will be necessary to use lacquer thinner or stronger solvents.
DRYING/CURING TIME: 2-12 hours depending on wet film thickness, humidity, and ambient temperature. Recoatable in 6-8 hours in most cases.
Updating...














