Shopping Cart
Your shopping cart is empty
Safecoat Naturals Oil Wax Finish is an organic plant-based premium hardener and sealer for unfinished woods.
It is an ideal choice for all ready to finish wood and bamboo floors and other interior wooden surfaces including furniture.
It contains a sophisticated combination of natural resins and waxes that together create a durable, water repellent, water-mark resistant finish and sealer, enhancing and maintaining wood beauty and breathability.
BEFORE USE: AFM Naturals Oil Wax Finish can be used on most unsealed wood, new or weathered. Surfaces must be cleaned of any grease, oils, dust, dirt, wax, prior coatings, adhesives and other foreign materials. Surface must be completely dry and stable before application. Moisture content of the wood must be below 12%. 
PREPARATION FOR NEW WOOD: Sand wood smooth with 150 grit sandpaper to open wood grain. Rinse surface with water-dampened rags to remove sanding dust. Dust and dirt must also be removed from cracks or other floor irregularities. Surfaces in good condition may only need a light sanding and cleaning to prepare for application of Safecoat Naturals Oil Wax Finish.
OLD UNFINISHED WOOD: Patch where necessary, and sand old wood surfaces with 150 grit sandpaper. Before applying oil finish, make sure surface is perfectly clean and free of dust, dirt and other foreign materials.
OLD PREVIOUSLY STAINED WOOD: Completely remove all old finish. Failure to remove the existing finish will result in a blotchy application due to uneven penetration and discoloration of aged finish. Adhere to ALL precautions and safety requirements when using strippers and finish removing equipment. WHEN STAINING NEW WOOD PRIOR TO APPLICATION OF THIS PRODUCT, ALWAYS TEST FOR NATURALS OIL WAX FINISH AND STAIN COMPATIBILITY.
Safecoat Naturals Oil Wax Finish may be sprayed using an airless sprayer with 0.11 tip or larger. Do not use Safecoat Naturals Oil Wax Finish on small enclosed spaces such as desk or dresser drawers unless they can be exposed to good ventilation. If desired and wood is still absorptive, another coat may be applied after 24 hours.
View Naturals Oil Wax Finish Care and Maintenance tips.
View Naturals Oil Wax Finish data sheet.
View Naturals Oil Wax Finish MSDS.
COVERAGE: Coverage will vary depending upon the type, age, and porosity of the wood and on the number of coats applied. Test patches will provide a good indication of likely coverage. In general, when applied in wet-on-wet coats to weathered wood, one gallon will cover from 125 square feet to 250 square feet; on new, relatively non- porous wood, from 250 - 450+ square feet.
CLEAN-UP: Clean tools and equipment while they are still wet with AFM Naturals Diluent/Reducer or grain alcohol. Have good ventilation during clean-up.
DRYING/CURING: Drying conditions will vary greatly depending on application techniques and weather conditions. Allow 24 hours to dry before use. Typically cures to full hardness in 3 weeks. Dried surface can be buffed by hand or machine.
Updating...
