Safecoat® AcriGlaze is a special mixing medium and finish suitable for use in the display, art and show fields. It is mildew resistant, odorless and dries clear. Ideal for restoring old finishes to their original brilliance, sealing and preserving painted work, faux finishing and as an adhesive for paper mache. Dries clear. Available in gloss and matte sheens. For interior or exterior use.
USE ON: Clear finish for masonry, brick, plaster, wood, paneling, etc., where a soft low luster finish and sealer is desired. May be used both interior or exterior as a reducer for any type of water-based paint. Excellent medium for artist colors and universal tints.
SCS CERTIFIED – LEED QUALIFIED
We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.
COVERAGE: One gallon of Safecoat AcriGlaze covers approximately 200-400 square feet in one coat depending on method of application and surface porosity.
THINNING: None required, water if needed.
CLEAN-UP: Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water.
DRYING/CURING TIME: Under normal conditions, Safecoat AcriGlaze dries to touch in one hour and is recoatable after four hours. Normal conditions include a clean, dry surface, access to fresh air flow, a dust free environment, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat AcriGlaze to dry and cure more slowly.
Updating...
